How it works is very much like our other dry mixes. It is a powder
that is combined with the Enforcer Additive and mixed
to the consistency you desire and then troweled on. It will take Oxidizer
Stains and/or Dyes. It reacts in a really strong fashion due to the
exceptionally high lime content.It is exterior applicable. If Oxidized or Dyed,
it does need a Liquid Hardener.It is more than
durable enough for floors. It can be spread as heavy as 1" w/o cracking.
It can be sanded within 24 hours, but sets rather quickly and may require
a grinder even within 24 hours in certain climates. Bella Vernici's
Slow-Drying Enforcer can be utilized to retard the drying time,
but does not have the same long-duration as when mixed with Overlay.
The sample shown above was troweled with a bedcoat...allowed to dry to
approximately 80%(defined as the moisture leaving the surface).
Then, it had a slurry coat hard-troweled over it to backfill it to a
semi-smooth finish.Rock salt was then thrown in and pushed down as it set.
The following day, a diamond grinder was put to it to expose the aggregate
and pits. Then, Hardener was mopped on. After that had dreid overnight,
three coats of Brown Gravy Wax were applied and buffed
between coats. This sample could also have been polished with a diamond
polisher to a mirror finish for a honed-travertine look.
Call 1-888-508-FAUX(3289) or click to the below to purchase...
Any materials shipped back unopened within 30 days
will be refunded less a 15% restocking fee.
Damaged goods will be replaced immediately.
All claims are filed through Bella Vernici offices.
In the sample below, the Limestone was troweled on in a bedcoat-
then immediately and sporatically applied as a lace coat over that.
It dried overnight and was washed with Bella Vernici Brown Dye the
following day. Bella Vernici Liquid Hardener was then applied.